Installation guide

Connecting the DVC-1100 WirelessConnecting the DVC-1100 Wireless

Connecting the DVC-1100 Wireless

VideoPhoneVideoPhone

VideoPhone

A. Place the DVC-1100 Wireless VideoPhone directly on top of a television.

To obtain the best viewing experience, the VideoPhone should be 5 to 10

feet away from the intended subject.

B. Attach the supplied audio/video cable to the DVC-1100 and to the

matching audio/video jacks on the television or VCR.

C. To connect to a network using an Ethernet cable, attach the supplied

Ethernet cable to the DVC-1100 and to the Cable or DSL modem or

Ethernet network device (hub, switch or router).

D. To connect using a wireless network, attach the supplied antenna to the

DVC-1100.

E. Attaching a telephone is optional, but recommended for optimal sound

quality. Attach a standard telephone cable to the telephone and directly

to the DVC-1100. Do NOT attach the telephone to a wall telephone

outlet.

F. Plug the supplied AC power cable into an AC outlet and then into the

DVC-1100.

G. Attaching an external microphone is optional, but recommended for

optimal sound for a group videoconference.

i2eyei2eye

i2eye