User's Manual

Chapter 2 Configuration
Access Controls – Services
To access Services, point to the Access Controls on the left window and click Services submenu, or click the Services button in
the Access Controls window.
This page lists out all the available services including Telnet,
FTP, HTTP, ICMP, SNMP, SSH and TFTP that can enable at
LAN, WAN or both. Tick to enable the services, or deselect to
disable them.
Access Controls – IP Address
To access IP Address, point to the Access Controls on the left window and click IP Address submenu, or click the IP Address
button in the Access Controls window.
Click Add to see the Add IP Address section. Enter an IP
address and click Apply in the section. The IP address will
show in the table in the Remote Web and Telnet Management
section. Tick the Enable Access Control Mode check box and
click Apply in this section to enable the function.
D-Link DVA-G3672B User Manual
64