User's Manual

Chapter 2 Configuration
Advanced – DMZ
To access the DMZ (Demilitarized Zone) window, click the DMZ button in the Advanced directory.
Since some applications are not compatible with NAT, the
Router supports use of a DMZ IP address for a single host on
the LAN. This IP address is not protected by NAT and will
therefore be visible to agents on the Internet with the right type
of software. Keep in mind that any client PC in the DMZ will be
exposed to various types of security risks. If you use the DMZ,
take measures (such as client-based virus protection) to protect
the remaining client PCs on your LAN from possible
contamination through the DMZ.
To designate a DMZ IP address, select Enabled DMZ, type in
the IP Address of the server or device on your LAN, and click
the Apply button. To remove DMZ status from the designated
IP address, deselect the Enable DMZ and click Apply. It will be
necessary to save the settings and reboot the Router before the
DMZ is activated.
D-Link DVA-G3672B User Manual
36