User's Manual

Chapter 2 Configuration

5. Most users will want to keep Enable IGMP selected as it allows IGMP packets to go through the WAN interface in both

directions.

6. Leave Enable Default deselected, if you have an alternative route for Internet traffic you may disable this without effecting the

Router’s connection. Select Enable Default Route if you want to use the Router as the default route to the Internet for your

LAN. Whenever a computer on the LAN attempts to access the Internet, the Router becomes the Internet gateway to the

computer.

7. Select Enable PPTP and enter the Tunnel Name, PPTP Server IP Address, UserName, Password, Peer IP Address and Peer

Subnet Mask to implement a tunnel sending PPP session to the peer.

8. When you are satisfied that all the settings are configured correctly, click the Apply button. This will save the settings.

9. Go to Maintenance -> System and click Reboot to restart the device and let your changes take effect.

D-Link DVA-G3672B User Manual