User manual

7D-Link DUB-E100 User Manual
Section 2 - Installation
3. When the Windows driver installation is complete, attach an Ethernet cable to the Ethernet port on the DUB-E100.
4. Attach the other end of the Ethernet cable to your network switch or router.
5. When the installation of the DUB-E100 is complete, the LINK LED should be solid green indicating a good physical connection
between the DUB-E100 and the network. The Tx/Rx LED blinks when data is being transmitted or received. If both LEDs are
unlit, there may be a problem with the physical connection. Check the cables between your DUB-E100 and your switch or
router. Verify that your network switch or router is powered on.