Installation Guide
ENGLISH
Quick Install Guide
4-Port SuperSpeed USB 3.0 Charger Hub
Thank you for purchasing the DUB-1340 4-Port SuperSpeed USB 3.0 Charger
Hub. Follow the easy steps in this guide to properly set up your Hub. Please
verify that all the package contents are available. If any of the items are
missing, please contact your reseller.
DUB-1340
Technical Support
Having trouble installing your new product? D-Link’s website contains the
latest user documentation and software updates for D-Link products. U.S. and
Canadian customers can contact D-Link Technical Support through our website.
United States
Internet:
http://support.dlink.com
Canada
Internet: http://support.dlink.ca
Copyright ©2020 All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link Corporation or its subsidiaries.
Other trademarks are the property of their respective owners. Maximum transfer rate based on USB 2.0 specications. Actual data
throughput will vary. The total power consumption of the connected USB devices must be less than 5V/2A. Product specications,
size and shape are subject to change without notice, and actual product appearance may dier from that depicted on the packaging.
Visit dlink.com (US) or dlink.ca (Canada) for more details.
Version 1.00 (NA)_94x128 | February 13, 2020 660-DL1-UH214B1C000
Package Contents
DUB-1340 4-Port SuperSpeed USB 3.0 Charger Hub
Power Adapter
USB 3.0 Cable
Quick Install Guide
System Requirements
Installation
• Windows® 7, 8, 8.1, 10
• Mac OS® X 10.4 or Higher
1. Connect the power adapter to the power
connector on the back of the DUB-1340, then plug
the power adapter into a power outlet.
2. Connect the included USB 3.0 cable to the
connector on the back of the DUB-1340.
3. Connect the other end to the USB 3.0 port on
your computer.
Panels
USB 3.0 Charging Ports x 4
(BC 1.2 support)
USB 3.0 Micro-B Connector
Power Connector
4. You may now connect your USB devices to the
hub. It is recommended to connect them one
at a time and allow your computer to recognize
the device.
Note: Please make sure that the power draw
requirements for devices connected to the DUB-
1340 do not exceed 2.4 A for a single port, or 3.2 A
total for all connected devices.