D-Link DU-562M External MODEM Conexant HSF V.90 / V.
D-Link DU-562M External Modem User’s Guide FCC Requirements This equipment complies with Part 68 of the FCC Rules. On the bottom of this equipment is a label that contains, among other information, the FCC Registration Number and Ringer Equivalence Number (REN) for this equipment. IF REQUESTED. THIS INFORMATION MUST BE GIVEN TO THE TELEPHONE COMPANY.
D-Link DU-562M External Modem User’s Guide WARNING ONLY CONNECT EQUIPMENT WITH A TELECOMMUNICATIONS COMPLIANCE LABEL WARNING FOR SAFETY REASONS, ONLY CONNECT EQUIPMENT WITH A TELECOMMUNICATIOS COMPLIANCE LABEL. THIS INCLUDES CUSTOMER EQUIPMENT PREVIOUSLY LABELLED PERMITTED OR CERTIFIED. Modems connected to the Australian telecommunications network must be marked in accordance with the Labeling Notice. This modem has been specifically configured to ensure compliance with the ACA Standards.
D-Link DU-562M External Modem User’s Guide Table of Contents Chapter 1 Introduction ..................................................................................5 1.1 Introduction ................................................................................................................. 5 1.2 What’s in the package................................................................................................. 5 Chapter 2 Specifications...........................................................
D-Link DU-562M External Modem User’s Guide Chapter 1 Introduction 1.1 Introduction Thank you for choosing the D-Link DU-562M External Modem. It is not only the most cost-effective solution to connect your PC to the Internet, but also increase the usage of the CPU and decrease the cost of ownership. It reduces the time and pain during installation procedure. All you have to do are just plug & play and inserting the CD-ROM Disk, even that you don’t need to turn off the power of your PC.
D-Link DU-562M External Modem User’s Guide Chapter 2 Specifications 2.1 Specifications Computer Interface USB V1.1 Line Interface RJ-11 for POTS line Data Protocols V.90 / V.92, K56flex, V.34, V.32bis, V.32, V.22bis, V.22, V.23, V.21, Bell 212A and 103 Data Speed 56k, 54k, 52k, 50k, 48k, 46k, 44k, 42k, 40k, 38k, 36k, 34k, 33.6k, 31.2k, 28.8k, 26.4k, 24k, 21.6k, 19.2k, 16.8k, 14.4k, 12k, 9600, 7200, 4800, 2400, 1200, 300 Data Compression V.42bis, MNP 5 Error Correction V.
D-Link DU-562M External Modem User’s Guide Chapter 3 Hardware Installation 1. Plug the connector of the USB Modem into the USB port of your PC. 2. Plug one end of telephone cord into the modem’s “LINE” jack, which is shown on the modem’s bracket labeled “LINE”. 3. Insert the other end of the cord into the telephone wall socket. 4. Enable the USB port option in the BIOS setup of your computer.
D-Link DU-562M External Modem User’s Guide Chapter 4 Software Installation The following sections explain how to install the modem drivers under Windows 98se/ME/2000/XP. Refer to the section, which best suites, your operating system. 4.1 Windows 98se 1 The computer wizard will find new hardware device, Please click Cancel to continue. 2 Please click Start \ Run on the desktop, then type the path: I:\Driver\Win98SE\Hxfsetup.exe ( I is the letter of CD-ROM drive ) and click OK to continue.
D-Link DU-562M External Modem 3 Click Yes. 4 Click Yes, restart computer now.
D-Link DU-562M External Modem User’s Guide 4.2 Windows ME 1 The computer wizard will find new hardware device, Please click Cancel to continue. 2 Please click Start \ Run on the desktop, then type the path: I:\Driver\WinME\HXFSetup.exe ( I is the letter of CD-ROM drive ) and click OK to continue.
D-Link DU-562M External Modem User’s Guide 4.3 Windows 2000 1 The computer wizard will find new hardware device, Please click Cancel to continue. 2 Please click Start \ Run on the desktop, then type the path: G:\Driver\Win2K\HXFSetup.exe ( G is the letter of CD-ROM drive ) and click OK to continue.
D-Link DU-562M External Modem User’s Guide 3 Click Yes,to continue this installation procedure 4 Click Yes 12
D-Link DU-562M External Modem User’s Guide 4.4 Windows XP 1. Please insert the driver CD supplied when you see the message of PCI Simple Communications Controller, Select the Install from a list or specific location [Advanced] then click Next to search for the driver. 2. Select Include this location in the search: and type a path: G:\Driver\WinXP (G is the letter of the CD-ROM drive), then click Next to continue.
D-Link DU-562M External Modem 3. Click Continue Anyway to continue. 4. Click Finish to end this procedure.
D-Link DU-562M External Modem User’s Guide Chapter 5 Select Modem Country The following sections explain how to install the modem drivers under Windows 98/ME/NT4.0/2000/XP. Refer to the section, which best suites, your operating system. 5.1 Windows 98/ME/2K 1 Move your courser as following sequence Start\Settings\Control Panel and click Control Panel. Then double-click on the HSF Modem Region Select icon.
D-Link DU-562M External Modem User’s Guide 5.2 Windows XP 1 Move your courser as following sequence Start\Settings\Control Panel and click ControlPanel. Then double-click on the HSF Modem Region Select icon. 2.
D-Link DU-562M External Modem User’s Guide Chapter 6 Diagnostics 6.1 Windows 98se/ME 1. Move your cursor as following sequence Start / Settings / Control Panel and double-click on the Modems icon. 2. TO test the Modem by clicking on the Diagnostics tab,Select the COM3 port that Modem is setting,and click More Info…..
D-Link DU-562M External Modem User’s Guide 3. If your modem is responding to AT commands and functioning correctly, it means that your modem is working properly. Click OK to end this procedure. 4. Click OK to end this procedure.
D-Link DU-562M External Modem User’s Guide 6.2 Windows 2000 1. Move your cursor as following sequence Start\Settings\Control Panel. Then double-click on the Phone and Modem Options icon. 2. Click Modems tab, then select D-Link DU-562M External Modem and click Properties.
D-Link DU-562M External Modem User’s Guide 3. Click Diagnostics tab, then click Query Modem. 4. If your modem is responding to AT commands and functioning correctly, it means that your modem is working properly. Click OK.
D-Link DU-562M External Modem 5. User’s Guide Click OK to end this procedure.
D-Link DU-562M External Modem User’s Guide 6.3 Windows XP 1. Move your cursor as following sequence Start\Settings\Control Panel. Then double-click on the Phone and Modem Options icon. 2. Click Modems tab, then select D-Link DU 562M External Modem and click Properties.
D-Link DU-562M External Modem User’s Guide 3. Click Diagnostics tab, then click Query Modem. 4. If your modem is responding to AT commands and functioning correctly, it means that your modem is working properly. Click OK.
D-Link DU-562M External Modem 5. User’s Guide Click OK to end this procedure.
D-Link DU-562M External Modem User’s Guide Chapter 7 Uninstalling 7.1 Windows 98se/ME 1. Move your cursor as following sequence Start / Settings / Control Panel and double-click on the Modems icon. 2. Select D-Link DU-562M External Modem , then click Remove.
D-Link DU-562M External Modem 3.
D-Link DU-562M External Modem User’s Guide 7.2 Windows 2000 1. Move your cursor as following sequence Start \ Settings \ Control Panel. Then double-click on the Add/Remove Programs icon. 2.
D-Link DU-562M External Modem 3.
D-Link DU-562M External Modem User’s Guide 7.3 Windows XP 1. Move your cursor as following sequence Start \ Settings \ Control Panel. Click on the Add Remove Programs icon. 2. Select D-Link DU-562M External Modem, then click Remove.
D-Link DU-562M External Modem 3.
D-Link DU-562M External Modem 0 User’s Guide Chapter 8 Troubleshooting Modem will not dial-out z Check your phone cable connected properly into LINE jack. z If you use the Tone-dialing on a line, but required the Pulse-dialing method, please change the command T to P in your dial command line. Modem will not answer an incoming call z Check your phone cable connected properly into LINE jack. z By connect a Telephone to the PHONE jack.