User Manual

11
U
NPACKING AND
I
NSTALLATION
This chapter provides unpacking and setup information for DSS-16+.
Unpacking
Open the shipping cartons and carefully unpacks its contents. The carton
should contain the following items:
 One 16-port 10/100M NWay Fast Ethernet Switch
 One external power adapter
 Four rubber feet to be used for shock cushioning
 User’s Guide
If any item is found missing or damaged, please contact your local reseller
for replacement.
Installation
The site where you install DSS-16+ may greatly affect its performance.
When installing, consider the following pointers:
 Install DSS-16+ in a fairly cool and dry place. See Technical
Specification for the acceptable operating temperature and humidity
ranges.
 Install DSS-16+ in a site free from strong electromagnetic source,
vibration, dust, and direct sunlight.
 Leave at least 10cm of space at the left and right hand side of DSS-16+
for ventilation.
 Visually inspect the DC power jack and make sure that it is fully secured
to the power adapter.
I
DENTIFYING
E
XTERNAL
C
OMPONENTS
This section identifies all the major external components of DSS-16+. Both
the front and rear panel is shown, followed by a description of each panel’s
feature. The LED indicator panel is described in detail in the next chapter.