Manual
Table Of Contents
- Preface
- Introduction
- Installation
- Basic Configuration
- LAN Configuration
- Connect to the Internet
- Wireless Settings
- VPN
- Security
- Maintenance
- Status and Statistics
- Troubleshooting
- Appendix A - Glossary
- Appendix B - Factory Default Settings
- Appendix C - Standard Services for Port Forwarding & Firewall Configuration
- Appendix D - Log Output Reference
- Appendix E - RJ-45 Pin-outs
- Appendix F - New Wi Fi Frequency table ( New appendix section )
- Appendix G - Product Statement
D-Link DSR-Series User Manual 68
Section 5 - Connect to the Internet
Field Description
Route Name Enter a name for your route.
Active Toggle to ON to activate this route or to OFF to deactivate.
IPv6 Destination Enter the IP address of the static route’s destination.
IPv6 Prex Length Enter the prex length of the static route.
Interface
The physical network interface (WAN1, WAN2, WAN3, DMZ or LAN), through which this route is
accessible.
IPv6 Gateway IPv6 address of the gateway through which the destination host or network can be reached.
Metric
Determines the priority of the route. If multiple routes to the same destination exist, the route with
the lowest metric is chosen.
Save Click Save to save your route.