Manual
Table Of Contents
- Preface
- Introduction
- Installation
- Basic Configuration
- LAN Configuration
- Connect to the Internet
- Wireless Settings
- VPN
- Security
- Maintenance
- Status and Statistics
- Troubleshooting
- Appendix A - Glossary
- Appendix B - Factory Default Settings
- Appendix C - Standard Services for Port Forwarding & Firewall Configuration
- Appendix D - Log Output Reference
- Appendix E - RJ-45 Pin-outs
- Appendix F - New Wi Fi Frequency table ( New appendix section )
- Appendix G - Product Statement
D-Link DSR-Series User Manual 55
Section 5 - Connect to the Internet
4. Enter the following information and click Save.
Field Description
Name
Enter a name for your prole. This identier is used to associate the congured prole to the
trac selector.
Policy Type Select the policy type (Inbound or Outbound) from the drop-down menu.
WAN Interface Select which WAN interface you want to associate this prole with.
Prole Type Select either Priority or Rate from the drop-down menu.
Priority If you selected Priority, select Low, Medium, or High.
Minimum Bandwidth Rate If you selected Rate, enter the minimum bandwidth rate.
Maximum Bandwidth Rate If you selected Rate, enter the maximum bandwidth rate.
Save Click Save to save your reservation.