Manual
Table Of Contents
- Preface
- Introduction
- Installation
- Basic Configuration
- LAN Configuration
- Connect to the Internet
- Wireless Settings
- VPN
- Security
- Maintenance
- Status and Statistics
- Troubleshooting
- Appendix A - Glossary
- Appendix B - Factory Default Settings
- Appendix C - Standard Services for Port Forwarding & Firewall Configuration
- Appendix D - Log Output Reference
- Appendix E - RJ-45 Pin-outs
- Appendix F - New Wi Fi Frequency table ( New appendix section )
- Appendix G - Product Statement
D-Link DSR-Series User Manual 54
Section 5 - Connect to the Internet
Trac Management
Path: Network > Internet > Trac Management > Bandwidth Proles
Bandwidth proles allow you to regulate the trac ow from the LAN to WAN 1 or WAN 2. This is useful to ensure
that low priority LAN users (like guests or HTTP service) do not monopolize the available WAN’s bandwidth for
cost-savings or bandwidth-priority-allocation purposes.
Bandwidth proles conguration consists of enabling the bandwidth control feature from the GUI and adding
a prole which denes the control parameters. The prole can then be associated with a trac selector, so that
bandwidth prole can be applied to the trac matching the selectors. Selectors are elements like IP addresses
or services that would trigger the congured bandwidth regulation.
To edit, delete, or create a new bandwidth prole:
1. Click Network > Internet > Trac Management > Bandwidth Proles.
2. Toggle Enable Bandwidth Proles to ON and click Save.
Bandwidth Proles
3. Click Add New Bandwidth Prole.