Manual

D-Link DSR-Series User Manual 281
Appendix D - Log Output Reference
ip_ct_ras: packet dropped DEBUG
MPPE/MPPC encryption/compression
module unregistered
INFO
ERROR registering port %d, DEBUG
PPP generic driver version PPP_
VERSION
INFO
ERROR registering port %d, DEBUG
MPPE/MPPC encryption/compression
module registered
INFO
ipt_connlimit [%d]: src=%u.%u.%u.%u:%d
dst=%u.%u.%u.%u:%d %s,
DEBUG
MPPE/MPPC encryption/compression
module unregistered
INFO
ipt_connlimit [%d]: src=%u.%u.%u.%u:%d
dst=%u.%u.%u.%u:%d new,
DEBUG
PPP generic driver version PPP_
VERSION
INFO
ipt_connlimit: Oops: invalid ct state ? DEBUG PPPoL2TP kernel driver, %s, INFO
ipt_connlimit: Hmm, kmalloc failed :-( DEBUG PPPoL2TP kernel driver, %s, INFO
ipt_connlimit: src=%u.%u.%u.%u
mask=%u.%u.%u.%u
DEBUG PPPoL2TP kernel driver, %s, INFO
_lvl PPPOL2TP: _fmt, ##args DEBUG failed to create procfs entry . INFO
%02X, ptr[length] DEBUG proc dir not created .. INFO
%02X, ((unsigned char *) m->msg_iov[i].iov_
base)[j]
DEBUG Initialzing Product Data modules INFO
%02X, skb->data[i] DEBUG De initializing by \ INFO
_lvl PPPOL2TP: _fmt, ##args DEBUG kernel UMI module loaded INFO
%02X, ptr[length] DEBUG kernel UMI module unloaded INFO
%02X, ((unsigned char *) m->msg_iov[i].iov_
base)[j]
DEBUG Loading bridge module INFO
%02X, skb->data[i] DEBUG Unloading bridge module INFO
_lvl PPPOL2TP: _fmt, ##args DEBUG unsupported command %d, cmd INFO
%02X, ptr[length] DEBUG Loading ifDev module INFO
%02X, ((unsigned char *) m->msg_iov[i].iov_
base)[j]
DEBUG Unloading ifDev module INFO
%02X, skb->data[i] DEBUG
ERROR#%d in alloc_chrdev_region,
result
INFO
KERN_EMERG THE value read is %d,value*/ DEBUG ERROR#%d in cdev_add, result INFO
KERN_EMERG Factory Reset button is pressed DEBUG using bcm switch %s, bcmswitch INFO
KERN_EMERG Returing error in INTR registration DEBUG
privlegedID %d wanporttNo: %d,
privlegedID,wanportNo
INFO
KERN_EMERG Initialzing Factory defaults
modules
DEBUG Loading mii INFO
Failed to allocate memory for pSipListNode DEBUG Unloading mii INFO
SIPALG: Memeory allocation failed for
pSipNodeEntryTbl
DEBUG %s: Version 0.1 INFO
pkt-err %s, pktInfo.error DEBUG %s: driver unloaded, dev_info INFO
pkt-err %s, pktInfo.error DEBUG
wlan: %s backend registered, be-
>iab_name
INFO
pkt-err %s, pktInfo.error DEBUG wlan: %s backend unregistered, INFO
%s Len=%d, msg, len DEBUG
wlan: %s acl policy registered, iac-
>iac_name
INFO
%02x , ((uint8_t *) ptr)[i] DEBUG
wlan: %s acl policy unregistered, iac-
>iac_name
INFO
End DEBUG %s, tmpbuf INFO
CVM_MOD_EXP_BASE MISMATCH cmd=%x
base=%x, cmd,
DEBUG VLAN2 INFO
op->sizeofptr = %ld, op->sizeofptr DEBUG VLAN3 INFO
opcode cmd = %x, cmd DEBUG VLAN4 <%d %d>, INFO
modexp opcode received DEBUG %s: %s, dev_info, version INFO
Memory Allocation failed DEBUG %s: driver unloaded, dev_info INFO
modexpcrt opcode received DEBUG %s, buf INFO
kmalloc failed DEBUG %s: %s (, dev_info, ath_hal_version INFO
kmalloc failed DEBUG %s: driver unloaded, dev_info INFO
kmalloc failed DEBUG
%s: %s: mem=0x%lx, irq=%d hw_
base=0x%p,
INFO
kmalloc failed DEBUG %s: %s, dev_info, version INFO
kmalloc Failed DEBUG %s: driver unloaded, dev_info INFO