Manual
Table Of Contents
- Preface
- Introduction
- Installation
- Basic Configuration
- LAN Configuration
- Connect to the Internet
- Wireless Settings
- VPN
- Security
- Maintenance
- Status and Statistics
- Troubleshooting
- Appendix A - Glossary
- Appendix B - Factory Default Settings
- Appendix C - Standard Services for Port Forwarding & Firewall Configuration
- Appendix D - Log Output Reference
- Appendix E - RJ-45 Pin-outs
- Appendix F - New Wi Fi Frequency table ( New appendix section )
- Appendix G - Product Statement
D-Link DSR-Series User Manual 230
Appendix B - Factory Default Settings
Appendix B - Factory Default Settings
Feature Description Default Settings
Device Login
User Login URL http://192.168.10.1
User Name admin
Password admin
Internet Connection
WAN MAC Address Use default address
WAN MTU size 1500
Port Speed Autosense
Local Area Network (LAN)
IP Address 192.168.10.1
IPv4 Subnet Mask 255.255.255.0
RIP Direction None
RIP Version Disabled
RIP Authentication Disabled
DHCP Server Enabled
DHCP Starting IP Address 192.168.10.2
DHCP Ending IP Address 192.168.10.100
Time Zone GMT
Daylight Saving Time Disabled
SNMP Disabled
Remote Management Disabled
Firewall
Inbound Communication from Internet Disabled (except Port 80 HTTP)
Outbound Communication to Internet Enabled (all)
Source MAC Filtering Disabled
Stealth Mode Enabled