Manual
Table Of Contents
- Preface
- Introduction
- Installation
- Basic Configuration
- LAN Configuration
- Connect to the Internet
- Wireless Settings
- VPN
- Security
- Maintenance
- Status and Statistics
- Troubleshooting
- Appendix A - Glossary
- Appendix B - Factory Default Settings
- Appendix C - Standard Services for Port Forwarding & Firewall Configuration
- Appendix D - Log Output Reference
- Appendix E - RJ-45 Pin-outs
- Appendix F - New Wi Fi Frequency table ( New appendix section )
- Appendix G - Product Statement
D-Link DSR-Series User Manual 194
Section 9 - Maintenance
Routing Logs
Path: Maintenance > Logs Settings > Routing Logs
Trac can be tracked based on whether the packet was accepted or dropped by the rewall. Denial of service
attacks, general attack information, login attempts, dropped packets, and similar events can be captured for
review.
Note: Enabling logging options may generate a signicant volume of log messages and is recommended for
debugging purposes only.
Trac through each network segment (LAN, WAN, DMZ) can be tracked based on whether the packet was
accepted or dropped by the rewall.
Accepted Packets are those that were successfully transferred through the corresponding network segment (i.e.,
LAN to WAN). This option is particularly useful when the Default Outbound Policy is “Block Always” so you can
monitor trac that is passed through the rewall.
Dropped Packets are packets that were intentionally blocked from being transferred through the corresponding
network segment. This option is useful when the Default Outbound Policy is “Allow Always”.
1. Click Maintenance > Log Settings > Routing Logs.
2. Toggle which events you want to log to ON and click Save.