Manual
Table Of Contents
- Preface
- Introduction
- Installation
- Basic Configuration
- LAN Configuration
- Connect to the Internet
- Wireless Settings
- VPN
- Security
- Maintenance
- Status and Statistics
- Troubleshooting
- Appendix A - Glossary
- Appendix B - Factory Default Settings
- Appendix C - Standard Services for Port Forwarding & Firewall Configuration
- Appendix D - Log Output Reference
- Appendix E - RJ-45 Pin-outs
- Appendix F - New Wi Fi Frequency table ( New appendix section )
- Appendix G - Product Statement
D-Link DSR-Series User Manual 186
Section 9 - Maintenance
Using USB
To upgrade the rmware using a USB thumb drive:
1. Download the latest rmware version from the D-Link support website and copy the le to a USB
thumb drive.
2. Plug the USB thumb drive into a USB port on the router.
3. Log in to the router and click Maintenance > Firmware > Firmware Upgrade > Using USB tab.
4. Select the rmware le from the list and click Upgrade.
Note: The upgrade process takes a few minutes. Do not interrupt the upgrade or turn o the router;
otherwise you can damage the rmware. Wait for the upgrade to complete before browsing any sites from
your browser.