Manual
Table Of Contents
- Preface
- Introduction
- Installation
- Basic Configuration
- LAN Configuration
- Connect to the Internet
- Wireless Settings
- VPN
- Security
- Maintenance
- Status and Statistics
- Troubleshooting
- Appendix A - Glossary
- Appendix B - Factory Default Settings
- Appendix C - Standard Services for Port Forwarding & Firewall Configuration
- Appendix D - Log Output Reference
- Appendix E - RJ-45 Pin-outs
- Appendix F - New Wi Fi Frequency table ( New appendix section )
- Appendix G - Product Statement
D-Link DSR-Series User Manual 178
Section 9 - Maintenance
Path: Maintenance > Management > Diagnostics > Network Tools
As part of the diagnostics functions on the router, you can ping an IP address or domain name. You can use this
function to test connectivity between the router and another device on the network or the Internet.
1. Click Maintenance > Diagnostics > Network Tools tab.
Diagnostics
Ping an IP Address/Domain Name
2. Under Command Output for Ping and Traceroute, in the IP Address/Domain Name eld, enter an IP
address or domain name.
3. Click Ping. The results will appear in the Command Output display below.