Manual
Table Of Contents
- Preface
- Introduction
- Installation
- Basic Configuration
- LAN Configuration
- Connect to the Internet
- Wireless Settings
- VPN
- Security
- Maintenance
- Status and Statistics
- Troubleshooting
- Appendix A - Glossary
- Appendix B - Factory Default Settings
- Appendix C - Standard Services for Port Forwarding & Firewall Configuration
- Appendix D - Log Output Reference
- Appendix E - RJ-45 Pin-outs
- Appendix F - New Wi Fi Frequency table ( New appendix section )
- Appendix G - Product Statement
D-Link DSR-Series User Manual 172
Section 9 - Maintenance
Web GUI Management
Path: Maintenance > Administration > Web GUI Management
The Web GUI Management page will allow you to specify by IP address or VLAN what users can congure the
router using the web GUI.
1. Click Maintenance > Administration > Web GUI Management.
2. Toggle Enable to ON and click Save.
3. Click Add New Conguration.
4. Enter a name for this conguration.
5. Select either Single IP Address and enter the IP address of the computer/device or VLAN Network
and enter the VLAN ID that you want to allow access to the web GUI.
6. Click Save.