Manual
Table Of Contents
- Preface
- Introduction
- Installation
- Basic Configuration
- LAN Configuration
- Connect to the Internet
- Wireless Settings
- VPN
- Security
- Maintenance
- Status and Statistics
- Troubleshooting
- Appendix A - Glossary
- Appendix B - Factory Default Settings
- Appendix C - Standard Services for Port Forwarding & Firewall Configuration
- Appendix D - Log Output Reference
- Appendix E - RJ-45 Pin-outs
- Appendix F - New Wi Fi Frequency table ( New appendix section )
- Appendix G - Product Statement
D-Link DSR-Series User Manual 125
Section 7 - VPN
3. Complete the elds in the table below and then click Save.
Field Description
GRE Tunnel Name Enter a name for the tunnel.
IP Address
Enter the IP address of this endpoint. It will be referenced in the other router’s static route as the Gateway
IP address.
Subnet Mask Enter the subnet mask.
Interface Select the interface to create this tunnel with from the drop-down menu.
Remote End Address Enter the WAN IP address of the endpoint router.
Enable DDP Broadcast Toggle to ON to enable DDP broadcasting.
IP Address Enter the destination IP address of the static route from the remote LAN subnet.
Subnet Mask Enter the subnet mask.
Gateway IP Address Enter the IP address of the termination router.
Save Click Save to save and activate your settings.