Manualshelf

User Manual

ManualsBrandsD-Link ManualsElectricalD-Link Smart Plug, Energy Monitoring, On/Off, DSP-W215, Works with Alexa and Google Assistant
12345678910
4D-Link DSP-W215 User Manual
Section 1 - Product Overview
Hardware Overview
LEDs and Buttons
1
3
2
4
1 WPS/Reset Button
Press for one second to start the WPS connection process. The System Status LED will start to blink green. To reset the
device to factory defaults, press and hold for about 10 seconds until the Status LED turns red.
2 Power Plug Plug the Smart Plug into a wall power socket.
3 Power Button Press to turn the connected device on or o.
4 System Status LED
Solid Green The uplink is established and an IP is provisioned.
Blinking Green WPS is activated.
Blinking Orange The uplink is not established or an IP is not provisioned.
Solid Red The smart plug is powering on or is defective.
Light O The smart plug is powered o.
5 Power Socket Connect your appliances, lamps, and other electronic devices you wish to monitor.
6 Power LED The LED will be solid green if the power socket is powered on.
6
5