User manual

98
Figure 5.7.2.1
2 Choose a JBOD which wants to upgrade.
3 Please prepare new firmware file in local hard drive, then click “Browse” to select
the file. Click “Confirm”.
4 After finished upgrading, the system must reboot manually to make the new
firmware took effect.
5.8 MPIO and MC/S
These features come from iSCSI initiator. They can be setup from iSCSI initiator to
establish redundant paths for sending I/O from the initiator to the target.
1. MPIO: In Microsoft Windows server base system, Microsoft MPIO driver allows
initiators to login multiple sessions to the same target and aggregate the duplicate
devices into a single device. Each session to the target can be established using
different NICs, network infrastructure and target ports. If one session fails, then
another session can continue processing I/O without interruption to the application.
Figure 5.8.1