User manual

67
2. In “/ Volume configuration / Logical unit”, click “Attach”.
The procedures are as follows:
Figure 4.4.6.5
1. Select a VD.
2. Input “Host” IQN, which is an iSCSI node name for access control, or fill-in wildcard
“*”, which means every host can access to this volume. Choose LUN and permission,
and then click “OK”.
3. Done.
Figure 4.4.6.6
Tips
T
he matchin
g
rules of access control are from the LUNs’ created time, the
earlier created LUN is prior to the matching rules.
Step 4: Set a global spare disk.
To set a global spare disk, please follow the procedures.
1. Select “/ Volume configuration / Physical disk”.
2. Check the gray button next to the PD slot; click “Set global space”.
3. “Global spare” status is shown in “Usage” column.