User manual

107
Tips
If the messa
g
e displays that there is not enou
g
h space for creation, please
refer to the section of Configure the snapshot space below for solution.
3. Enter the IP address of iSCSI port on controller 1 of the target IP SAN storage. Click
“Next” to continue.
Figure 5.11.8
4. The Replication uses standard iSCSI protocol for data replication. User has to log on
the iSCSI node to create the iSCSI connection for the data transmission. Enter the
CHAP information if necessary and select the target node to log no. Click “Next” to
continue.
Figure 5.11.9