User`s guide

xStack Storage Management Center Software User’s Guide 115
7.6.1 VLAN-Enabling a Port
To VLAN-enable a port:
1. In the Network Settings View, click an Ethernet port in the Main Display.
2. Perform one of the following steps:
– On the Network menu, click Replace Port with VLAN enabled Port.
– Click Replace Port with VLAN enabled Port in the Network Actions panel.
– Press the right mouse button and click Replace Port with VLAN enabled Port from
the shortcut menu.
7.6.2 Removing a Port from a VLAN
If you no longer want a port to participate in a VLAN:
1. In the Network Settings View, click a VLAN-enabled Ethernet port in the Main Display.
2. Perform one of the following steps:
– On the Network menu, click Replace VLAN enabled Port with standard Port.
– Click Replace VLAN enabled Port with standard Port in the Network Actions panel.
– Press the right mouse button and click Replace VLAN enabled Port with standard
Port from the shortcut menu.
7.6.3 VLAN-Enabling a Group
There are two ways to VLAN enable a group:
 When you create the group - check Create VLAN enabled Group in the Group Ports
dialog box (see section 7.5.1).
 After you create a group – using the Replace Group with VLAN enabled Group option
(described below).
To VLAN-enable a group using the Replace Group with VLAN enabled Group option:
1. In the Network Settings View, click a group in the Main Display.
2. Perform one of the following steps:
– On the Network menu, click Replace Group with VLAN enabled Group.
– Click Replace Group with VLAN enabled Group in the Network Actions panel.
– Press the right mouse button and click Replace Group with VLAN enabled Group
from the shortcut menu.
7.6.4 Removing a Group from a VLAN
If you no longer want a group to participate in a VLAN: