User`s guide

98 Chapter 5 Configuring the XStack Storage
5.3.5.1 Changing the CHAP Secret
When you created an iSCSI target node, you could specify an optional CHAP secret. If desired,
you can change the CHAP secret using the following procedure. If you change the CHAP secret,
record the information in
Table D-5 on page 170.
1. Click a network entity (prefaced by naa) in the Logical Resources tab.
2. On the iSCSI menu, click Change CHAP Secret. The Set CHAP Secret dialog box appears (see
Figure 5-35).
Figure 5-35. Set CHAP Secret Dialog Box
3. Complete the fields in the dialog box:
– CHAP Secret. Enter the CHAP secret.
– Confirm CHAP Secret. Enter the same CHAP secret.
The CHAP secret is case sensitive. For security, each typed character in
CHAP Secret and Confirm CHAP Secret appears as an asterisk (*).
4. Click OK.