User`s guide

XStack Storage User’s Guide 97
Figure 5-34. Create iSCSI Node Wizard – Volume Access Right Screen
12. The left box lists all the volumes you have created. Click a volume in this list, then click Add
to move the selected volume to the right box.
You can select more than one volume in the left box:
 To select contiguous volumes in the left box, click the first
volume; then hold down the Shift key and click the last
volume. All volumes between the first and last volumes are
selected.
 To select noncontiguous volumes in the left box, click the
first volume; then hold down the Ctrl key and click each
additional volume you want to select.
 To remove the selection from a volume in the left box, hold
down the Ctrl key and click the volume.
If you want to remove a volume from the right box, click the volume in the
right box and click Remove to return the volume to the left box.
10. Click Finish.