User`s guide

96 Chapter 5 Configuring the XStack Storage
Figure 5-33 Create iSCSI Node Wizard – Initiator List Screen
9. The left box lists all the iSCSI initiators you have defined. Click the iSCSI initiator(s) in this
list that are allowed to access the volumes through the target network portals whose IP
addresses you selected in the previous screen.
10. Click Add to move the selected iSCSI initiator(s) to the right box.
If you want to remove an iSCSI initiator from the right box, click the iSCSI
initiator in the right box and click Remove to return the iSCSI initiator to the
left box.
11. Click Next. The Volume Access Right screen appears (see Figure 5-34).