User`s guide

XStack Storage User’s Guide 91
Either step starts the Create Network Portal Wizard and displays the Set the IP Address
screen (see
Figure 5-28).
Figure 5-28 Create Network Portal Wizard – Set the IP Address Screen
3. Complete the fields in the screen:
– IP Address. Enter the IP address for the network portal. The IP address must be a unique
address that is different than the management port and on the same subnet as the iSCSI
initiator. For more information, refer to Appendix E.
– Subnet mask. Enter a subnet mask for the network portal or press the Tab key to
automatically set the default subnet mask to 255.255.255.0.
4. Click the Finish button.