User`s guide

86 Chapter 5 Configuring the XStack Storage
Figure 5-25 Create Link Aggregation Group Wizard - Add/Delete Ethernet Ports Screen
7. To add Ethernet ports, select one or more ports in the left box and click Add to move them
to the right box.
8. To remove one or more Ethernet ports, select them in the right box and click Remove to
move it to the left box.
9. When you finish adding Ethernet ports, click the Finish button.
After you create LAGs, you can monitor their status using the LAG Port Info
screen (refer to Section
6.3.4).