User`s guide

XStack Storage User’s Guide 81
5.3.1.6 Performing a Media Scan on a Volume
Using the XStack Storage management console, you can scan a JBOD, stripe, stripe mirror, or
stripe mirror media volume for errors. This task reads every block in the volume looking for
errors as described for Media Scan to ensure that the media is correct. If media errors are found,
this task corrects the errors.
To perform a media scan on a volume, use the following procedure.
1. Click the volume on which you want to perform the media scan.
2. Perform one of the following steps:
– On the Storage menu, click Media Scan.
– Right-click and click Media Scan
Either step starts the scan operation and displays the message in
Figure 5-21.
Figure 5-21 Scan Successfully Started Message
3. Click OK to remove the message.
After you start a media scan task, you can use the Tasks Info screen to view the progress of the
scan operation (refer to Section
6.2.3.2).