User`s guide

78 Chapter 5 Configuring the XStack Storage
Figure 5-17 Expand Volume Message
5. Click OK to remove the message.
If the selected volume cannot support the size you specified, an error
message appears. If this occurs, specify a smaller size.
5.3.1.4 Deleting Volumes
If you no longer need a volume, use the following procedure to delete it.
You cannot delete a volume on a target node that has an active iSCSI
connection. Target nodes with an active iSCSI connection have a plus sign in
front of their name (the name is prefaced with naa followed by a string of
numbers and letters). If the volume you want to delete has an iSCSI
connection, log out of the target node and then delete the volume on that
target node.
1. In the Logical Resources tab, click the volume you want to delete.
2. Perform one of the following steps:
– On the Storage menu, click Delete Volume.
– Press the right mouse button and click Delete Volume.