User`s guide

70 Chapter 5 Configuring the XStack Storage
5.3.1.1.1 Creating Volumes Automatically
To create volumes automatically with the Create Volume Wizard, use the following procedure. As
you create volumes, record the information in
Table D-1 on page 162.
1. In the Logical Resources tab, click Blade A Base Pool.
2. Perform one of the following steps in the Logical Resources tab:
– Click the Create Volume button on the toolbar:
– On the Storage menu, click Create Volume.
– Right-click Blade A Base Pool and click Create Volume:
Any of these steps starts the Create Volume Wizard and displays the Select Volume Type to
Create screen (see
Figure 5-12).
Figure 5-12 Volume Wizard Screen – Select Volume Type to Create Screen