User`s guide

XStack Storage User’s Guide 65
Either step displays the Configure Out of Band Port dialog box, with the current settings
shown (see
Figure 5-9).
Figure 5-9 Configure Out of Band Port Dialog Box
3. Complete the fields in the dialog box:
– IP address after restart. Enter an available IP address that will take effect after the
XStack Storage unit restarts.
– Subnet Mask after restart. Enter the subnet mask that will take effect after the XStack
Storage unit restarts.
– Host name after restart. The XStack Storage unit is assigned a default host name. If
desired, you can change this name to one that is meaningful to you.
– Gateway after restart. Enter the gateway that will take effect after the XStack Storage
unit restarts.