User`s guide

52 Chapter 4 Installing the XStack Storage
4.9 Connecting the Power Cords
The receptacles for connecting the XStack Storage unit’s three power cords appears on the back
of the unit as seen in
Figure 4-2. To connect a power cord for each of the power supplies three
redundant power modules, use the following procedure.
1. Plug the female end of the power cord into one of the three 3-pronged power connectors on
the back of the XStack Storage unit.
2. Plug the other end of the power cord into a working AC outlet that is not controlled by a wall
outlet.
3. Repeat steps 1 and 2 for the remaining two power cords. Installed power cables can be seen
in
Figure F- 2.
Figure 4-2 Power Supply