User`s guide

158 Appendix B Upgrading Firmware
Figure 6-26. Example of the Open Dialog Box
9. Navigate to the location where the firmware file you downloaded resides.
10. Click the firmware file, then click the Open button. (Or as a shortcut, double-click the
firmware file). The new firmware is installed. A progress bar shows the status of the
installation.
11. After the firmware is installed, a message prompts you to press OK to restart the XStack
Storage to have the new firmware take effect.
12. Click OK to restart the XStack Storage. If additional messages appear, click OK to
remove them.
13. After the XStack Storage restarts, launch your Web browser again and log in to the
XStack Storage management console.
The Firmware Image Info screen shows the current active firmware image
being used by the XStack Storage. For more information, refer to Section
6.1.5.