User`s guide

154 Appendix A Summary of Menus and Commands
A.4 Network Menu
The Network menu contains the following commands.
Command Description
Create Network Portal Lets you create a network portal.
Delete Network Portal Lets you delete a network portal.
Create LAG Lets you create a LAG.
Delete LAG Lets you delete a LAG,
Modify LAG Parameters Lets you change the settings for a
selected LAG.
Reset Statistics Reserved for future use.
Modify Network Portal IP Address Lets you modify a network portal IP
address.
Config Physical Port Lets you configure a selected
physical port.
View Manual Route Lets you view the manual route.
A.5 iSCSI Menu
The iSCSI menu contains the following commands.
Command Description
Add Initiator Lets you add an iSCSI initiator.
Delete Initiator Lets you delete an iSCSI initiator.
Set CHAP Secret Lets you specify a CHAP secret.
Rename Alias Reserved for future use.
Create iSCSI Target Node Lets you create an iSCSI node.
Delete Target Node Lets you delete an iSCSI target
node.
Modify Target Node Parameters Lets you change the settings for a
selected iSCSI target.
Modify Initiator List Lets you change the entries in the
iSCSI initiator list.
Modify Volume Access Mode Lets you change the settings for a
selected volume.
Modify Network Portal Lets you change the settings for a
selected network portal.