User`s guide

120 Chapter 5 Configuring the XStack Storage
5.6.3 Restoring Factory Defaults
To return the XStack Storage to its factory-default settings, use the following procedure.
When you return to the factory-default settings, the XStack Storage IP port
reverts to 192.168.1.1.
1. On the File menu, click Restore Factory Defaults. The message in
Figure 5-54 appears.
Figure 5-54. Restore Factory Defaults Message
2. Click Yes to restore the factory-default settings. (Or click No to keep the current
configuration.) If you clicked Yes, another dialog box asks whether you want to keep the
current management port configuration settings. Click Yes to keep them and proceed, No to
revert to the default management port settings and proceed (refer to Section
5.2.1), or
Cancel to cancel the operation. If you clicked Yes or No, the XStack Storage loads the
factory-default settings (including those for the management port if you clicked Yes) and the
message in
Figure 5-55 appears.
Figure 5-55. Restore to Factory Defaults Succeeded Message
3. Click OK to restart the XStack Storage with the factory-default settings.