User Manual

37D-Link DSM-510 User Manual

Section 3 - Conﬁguration

Wireless LAN Settings

Scan for wireless

LANs:

Manual

Conﬁguration:

Windows Connect

Now:

Click this button to search for wireless LANs, and select your Access

Point.

Click this button to manually connect to the network (see the following

screen).

Click this option if you want to use Windows Connect Now

to conﬁgure

your device’s wireless connection. If you want to conﬁgure your device’s

wireless connection, please continue to page 42.

MODE:

Wireless LAN Type:

SSID:

Encryption Type:

Cryptography Key:

Choose between Ad-Hoc or Infrastructure.

Ad-Hoc should be selected when the DSM-510 is directly connected to

other wireless network devices without an access point.

Infrastructure should be selected when the DSM-510 is connected to

the wireless LAN where an accesss point device exists.

Select between either 802.11b/g or 802.11a.

Using the software keyboard input the SSID, which should be used by

the existing wireless network.

Select between None, WEP, or WPA.

When WEP or WPA is selected in Encryption Type, two boxes will appear (the Index Selection box and the

Cryptography Key input box.

Index Selection box allows you to select an Index number from 1 to 4. Each index number saves a Cryptography

Key.

Cryptography Key allows you to enter the WEP or WPA key used in the existing wireless network.

Manual Conﬁguration