User Manual

21D-Link DSM-510 User Manual
Section 2 - Installation
Power on the DSM-510
Plug in the DSM-510’s power cable into the back panel connector, the unit should power
on immediately.
Note: If you are using the composite or HDMI video connection, the DSM-510 will automatically
detect the correct video signal.
If you are connecting through a wired Ethernet cable, please continue to page 26.
If you are connecting the DSM-510 wirelessly and do not have an Intel
®
Viiv
™
technology verified
router, please continue to page 24.
If you are connecting the DSM-510 wirelessly and have an Intel
®
Viiv
™
technology verified router,
please continue to page 22.