Specifications

14
Home > Wireless (continued)
Set as Default Interface: Select Yes for wireless. Select No for wired.
Wireless Mode:
Client: Select this mode to use the DSM-622H/624H in client mode
Access Point: Select this mode to use in access point mode.
SSID: Enter the SSID in access point mode. You may click Site Survey to select an
available wireless AP or router.
Mode: Select 802.11g or 802.11b mode
Channel: Select the channel here.
WEP: Select Enabled or Disabled.
WEP Encryption: Select the encryption level here.
Key Type: Select HEX or ASCII.
Keys 1-4: You can input up to 4 encryption keys. Click to select the key you wish to
use.
The Wireless IP Address settings of the DSM-622H/DSM-624H
Dynamic IP: Select to obtain an IP address from a DHCP server
Static IP: Select to manually assign an IP address. When you select this option you
will fill out the fields below.
Static IP Address: Enter the IP address in this field
Subnet Mask: Enter the subnet mask
Gateway Address: Enter the gateway address
Apply: Click Apply to save the changes.
Using the Configuration Utility (continued)