Specifications

6
Setting up a Wireless Connection
(continued)
After clicking No, the Wireless
screen will appear.
Click Yes under
the Set as Default
Interface setting.
Click Dynamic IP or click
Static IP and manually input
your Static IP Address, Subnet
Mask, and Gateway Address .
Click Apply.
Your wireless connection setup is now complete!
Note: For information on configuring the DSM-622H/624H as a wireless client or help
with the other features on this page, please refer to the section titled Using the
Configuration Utility in the manual.
Select your Wireless Mode and
input your wireless settings.
You can now unplug the Ethernet cable and access the DSM-622H/624H wirelessly.