User's Manual Part 2

Section 3 – Configuration
D-Link DSL-2640R User Manual 46
SNMP
Simple Network Management Protocol is a
standard for internetwork and intranetwork
management.
Enter the desired information in the Get
Community and Set Community fields and then
click the SAVE button when you are finished with
your SNMP settings.
UPnP
UPnP supports zero-configuration networking and
automatic discovery for many types of networked
devices. When enabled, it allows other devices that
support UPnP to dynamically join a network, obtain
an IP address, convey its capabilities, and learn
about the presence and capabilities of other
devices. DHCP and DNS service can also be used
if available on the network. UPnP also allows
supported devices to leave a network automatically
without adverse effects to the device or other
devices on the network.
Diverse networking media including Ethernet,
Firewire, phone line, and power line networking can
support UPnP.
To enable UPnP for any available connection, click
Activated, and click the SAVE button. You can also
opt to allow user to make configuration changes
through UPnP by selecting Activated under the
Auto-configured setting.