Installation Instructions Part 1

Section 3 – Configuration
D-Link DSL-2640R User Manual 27
Wireless Setup
The two essential settings for wireless LAN operation are the SSID and
Channel Number. The SSID (Service Set Identifier) is used to identify a
group of wireless LAN components. The SSID can be broadcast in order
to allow properly configured wireless stations to learn the SSID and join
the group.
Wireless LAN is enabled by default on the Router. If the wireless access
point has been previously disabled you can enable 802.11g Wireless LAN
operation by selecting the Activated option for Wireless LAN and
continue to configure basic settings. Click the SAVE button to begin
wireless LAN function with the settings as configured. It is not necessary
to reboot the Router.