Installation guide

DSL-6740U Quick Installation Guide

6. For the Static IP connection type, fill in the IP Address, Netmask,

and Gateway IP address fields in the IP section.

7. Deselect the NAT checkbox in the Miscellaneous section if your ISP

requires you to disable the network address translation function.

8. Click the Save button.

ADSL WAN Connection

1. Go to the Net / WAN page and click the Add button.

2. From the Connection Type drop-down list, select the needed value.

3. From the Interface drop-down list, select the DSL(new) value.

4. Specify a name for your connection (any name for easier identification) in

the Name field.

5. In the ATM section, specify the VPI and VCI in the relevant fields, and

then select a method of encapsulation from the Encapsulation Mode

drop-down list.