User Manual

80D-Link DSL-520B ADSL2+ Modem User Manual
Section 12 - Troubleshooting
•CongureyourInternetsettings:
•GotoStart > Settings > Control Panel. Double-click the Internet Options Icon. From the Securitytab,clickthebuttontorestore
the settings to their defaults.
•ClicktheConnection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings button. Make sure nothing
is checked. Click OK.
•GototheAdvanced tab and click the button to restore these settings to their defaults. Click OK three times.
•Closeyourwebbrowser(ifopen)andopenit.
•Accessthewebmanagement.OpenyourwebbrowserandentertheIPaddressofyourD-Linkmodemintheaddressbar.Thisshouldopenthe
login page for your the web management.
•Ifyoustillcannotaccesstheconguration,unplugthepowertothemodemfor10secondsandplugbackin.Waitabout30secondsandtry
accessingtheconguration.Ifyouhavemultiplecomputers,tryconnectingusingadierentcomputer.
2. What can I do if I forgot my password?
Ifyouforgotyourpassword,youmustresetyourmodem.Unfortunatelythisprocesswillchangeallyoursettingsbacktothefactorydefaults.
Toresetthemodem,locatetheresetbutton(hole)ontherearpaneloftheunit.Withthemodempoweredon,useapapercliptoholdthebutton
down for 10 seconds. Release the button and the modem will go through its reboot process. Wait about 30 seconds to access the modem. For
information about logging into the modem see page 16.