User manual
56D-Link DSL-500B User Manual
Web Conguration
Outgoing IP Filtering Setup
In this page, you can create a lter rule to identify outgoing IP
trafc by specifying a new lter name and at least one condition. All
specied conditions in the ltering rule must comply with the rule to
take effect.
Click Save/Apply to save and activate the lter.
Incoming IP Filtering Setup
Select Security > IP Filtering > Incoming. The Incoming IP
Filtering Setup page will appear.
By default, all incoming IP trafc from the WAN is blocked when
the rewall is enabled. However, some IP trafc can be accepted
by setting up lters.
Click Add and the Add IP Filter- Incoming page will appear.
In this page, you can create a lter rule to identify incoming IP
trafc by specifying a new lter name and at least one condition. All
specied conditions in this lter rule must comply with the rule.
Click Save/Apply to save and activate the lter.
Note: You should select at least one WAN interface to apply this
rule.