User manual
50D-Link DSL-500B User Manual
Web Conguration
Adding Port Forwarding
Step 1
To set up virtual servers for a service, go to Advanced Setup >
NAT > Virtual Servers, and then click Add.
Step 2
Select a service or enter a custom server.
Step 3
Set the Server IP Address.
Step 4
Enter the server IP address of the computer that provides the
service (the server in the local host eld). Note that unless an
additional external IP address is added, only one LAN computer
can be assigned to provide a specic service or application.
Step 5
Set External Port Start and External Port End.
Step 6
Select a Protocol from the drop-down box.
Step 7
Set Internal Port Start and Internal Port End.
Step 8
Enter Remote IP.