User manual

21D-Link DSL-500B User Manual
Web Conguration
The rst time you setup the Router. It is recommended that you congure the WAN connection using a single
computer, to ensure that both the computer and the Router are not connected to the LAN. Once the WAN
connection operates properly, you may continue to make changes to Router conguration, including IP settings and
DHCP setup.
Introduction to Web Conguration
Web Conguration
Step 1
Open a web browser such as Internet Explorer on your computer.
Step 2
Type 192.168.254.254 (DSL router default IP address) in the
address bar. The login page will appear.
Step 3
Enter a user name and the password. The default username and
password of the super user are admin and admin.
If you get a Page Cannot be Displayed error, please refer to the
Troubleshooting section for information.
Note: It is recommended to change these default values after
logging in to the DSL router for the rst time.
Step 4
Click OK to log in or click Cancel to exit the login page.
After logging in to the DSL router as a super user, you can query,
congure, modify all conguration, and diagnose the system.
Web-based Conguration Utility