User`s guide

DSL-500 ADSL Router User’s Guide
23
Line Splitter
If you are instructed to use a “line splitter”, you must install the device between
the Modem and the phone jack. Use standard telephone cable with standard RJ-
11 connectors. The splitter has three RJ-11 ports used to connect to the wall jack,
the Modem and if desired, a telephone or telephone device. The connection ports
are typically labeled as follows:
Line
- This port connects to the wall jack.
ADSL
– This port connects to the Modem.
Phone
– This port connects to a telephone or other telephone device.
The diagram below illustrates the proper use of the splitter.
Line Splitter Installation