User manual

8D-Link EBR-2310 User Manual
Section 1 - Product Overview
Reset
Used to restore the EBR-2310
back to factory default settings.
Rear Panel
*All ports (both LAN & WAN) are Auto-MDIX. All ports auto-sense cable types to accommodate Straight-through or
Cross-over cable.
Power
Connect one end of your included
power adapter to the power port
and the other end into your power
outlet.
WAN*
WAN port socket (CAT5 Ethernet RJ-45 cable).
This is where you will connect your Cable or DSL
LAN PORTS* 1-4
LAN port sockets (CAT5 Ethernet RJ-45
cable). The LED glows steadily when
a port is connected to a hub, switch or
network-adapter-equipped computer in
your local area network (LAN.)