User manual

42D-Link EBR-2310 User Manual
Section 3 - Configuration
Use this option to save the current router configuration settings to
a file on the hard disk of the computer you are using. First, click the
Save button. You will then see a file dialog, where you can select
a location and file name for the settings.
Use this option to load previously saved router configuration
settings. First, use the Browse control to find a previously save file
of configuration settings. Then, click the Load button to transfer
those settings to the router.
This option will restore all configuration settings back to the settings
that were in effect at the time the router was shipped from the
factory. Any settings that have not been saved will be lost, including
any rules that you have created. If you want to save the current
router configuration settings, use the Save button above.
Click to reboot the router.
Save Settings to
Local Hard Drive:
Load Settings
from Local Hard
Drive:
Restore to Factory
Default Settings:
Reboot Device:
System Settings